|
Home > Europe > Equipment Products 
|
Sump Clean-Out Systems
Yellow Bellied Sump Suckers™ - The answer to fast, thorough cleaning of machine coolant sumps. There is no faster, more powerful sump cleaner.
|
|
|
The Drum Top Sump Cleaner is a vacuum unit that converts an existing open-top drum into a powerful machine tool sump cleaner. The drum top is an economical alternative to a dedicated sump cleaner.
Features:
- Heavy-duty drum cover to fit on standard 55 U.S. gallon (205 liter) open top drums
- Air venturi vacuum generator
- Positive sealing mechanical float for drum overfill protection
- 2" (50mm) dia. x 10' (3m) L suction hose
- 2" (50mm) dia. x 36" (1m) L round cleaning tool
|
|
MCC Reversible LIQUI-VAC™
For Sump CLeaning
|
|
|
Removing spent coolants, waste fluids, or oils from machine sumps, reservoirs, or storage tanks is usually just plain bothersome. Inexpensive vacuums will not do a satisfactory job, are quite loud, and are not built for the industrial environment.
Now, the MCC Reversible LIQUI-VAC™ provides the solution to your sump cleaning problems. It is small enough to fit in your hand, yet it sucks up tramp oils, used oils, and waste
coolants fast and simple. This unit will also discharge fluids out of the drum into a separate container if desired with just the turn of a knob.
Features:
- Operates on shop air
- Attaches to small bung on a standard drum
- Has one moving parts
- Requires no maintenance
- Has whisper quiet exhaust
The MCC Reversible LIQUI-VAC
comes in a kit that includes everything
you need to start using it the
very first day. The standard kit
includes:
- Venturi unit
- 1+" x 10' (38mm. X 3 m L) suction hose
- Drum standpipe adapter
- Quick disconnect fittings
- Air control valve
- Safety shut-off valve
- Aluminum wand
|
|
Yellow Bellied Sump Sucker™
|
|
|
The Yellow Bellied Sump Sucker™
will clean virtually any machine tool sump quickly and thoroughly. During the process of cleaning the machine, the sump cleaner also:
Removes the coolant,
sludge and chips from the sump
Filters the sludge
and chips from the coolant
Returns the filtered
coolant to the sump, or
Transports the
coolant to waste treatment for disposal or to a Master Chemical XYBEX®
Recycling System
The Yellow Bellied Sump Sucker is fast! In a typical example, a cylindrical
grinder sump with 120 U.S. gallons (454 liters) of coolant and 700 pounds
(318 kilograms) of sludge was completely cleaned, the coolant filtered,
and returned to the sump in ten minutes.
Features:
- Capacities from 65 U.S. gallons (246 liters) to 1,000 U.S. gallons (3780 liters)
- Single or twin compartment configuration
- Push around, tow around, or truck mounted units available
- 3.5 ft3 (.095m3) or 5.3 ft3 (.14m3) holding capacity sludge basket
- Air, 110V single phase, 3 phase electric, or LP gas power sources
- Complete with hoses and cleaning tools
|
|
Yellow Bellied Sump Sucker™ LI'L SUCKER
LI'L SUCKER™
|
|
|
The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.
- Removes the coolant, sludge, and chips from the sump
- Filters the sludge and chips from the fluid
- Returns filtered coolant to the machine tool sump, or
- Transports the coolant to waste treatment for disposal, or
to a Master Chemical XYBEX® Recycling System for recycling
Features:
- Tank capacity of 50 gallons (190 liters)
- Suction rate up to 85 GPM (320 LPM)
- Discharge rate up to 40 GPM (150 LPM)
- 1.6 ft3 (45 dm3) chip basket holding capacity, roughly 12 gallons (45 liters)
- Available in both air venturi and electric models
- 120 VAC, single phase, 50 Hz/60 Hz electric model standard
- 220 VAC, single phase, 50 Hz/60 Hz electric model optional
- Complete with hoses and straight cleaning tool
- Optional cleaning tools available
- Perfect for today\'s smaller machine tool sumps
|
|
Yellow Bellied Sump Sucker™ Push
|
|
|
- Single compartment - up to 275 U.S. gallons (1000 liters)
- Twin compartment - up to 100/100 U.S. gallons (380/380 liters)
- Custom sizes available
- Feature center-mounted, high impact, ball bearing wheels for good maneuverability and low rolling resistance
|
|
Yellow Bellied Sump Suckers™ Tow
|
|
|
- Single compartment - up to 1000 U.S. gallons (3780 liters)
- Twin compartment - up to 500/500 U.S. gallons (1890/1890) liters
- Features heavy duty, four caster design (two swivel and two fixed) with low center of gravity for stability. Tow hitch is included
|
|
Yellow Bellied Sump Sucker™ Truck
|
|
|
- A YBSS can be assembled on an LP or electric industrial truck for added mobility within a plant atmosphere
- Single compartment - up to 400 U.S. gallons (1500 liters)
- Twin compartment - up to 200/200 U.S. gallons (750/750 liters)
|
|
|
Aerospace
