|
Home > Europe > Fluid Products > Cleaners & Washing Compounds 
|
Immersion
TRIM® immersion cleaners use effective chemical action to clean parts that are immersed in a washing bath. TRIM immersion cleaners operate at low concentrations, and lower temperatures, which increases your bottom line by reducing makeup and saving energy costs. TRIM immersion cleaners provide corrosion inhibition and eliminate staining rejects. TRIM Ultrasonic cleaners provide faster cleaning, eliminate staining rejects, and clean at lower temperatures.
|
 |
TRIM® CLEAN 2023
Washing Fluid for Aluminum and Multi-Metal Parts
|
|
|
TRIM® CLEAN 2023 “BIG AL” is a highly concentrated liquid parts washing compound/corrosion inhibitor for use in spray washers. This product is safe and effective on aluminum alloy and steel alloy parts, as well as cast iron. CLEAN 2023 “BIG AL” provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids.
- Inhibits darkening or smutting of aluminum alloys even at elevated temperatures.
- Excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
- Provides long bath life
- Environmental approvals are simplified because CLEAN 2023 “BIG AL” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers above 120°F
- Typically provides up to one week in-process corrosion inhibition on ferrous parts if not rinsed.
|
|
TRIM® CLEAN 2029
Parts Washing Fluid with Corrosion Inhibitor
|
|
|
TRIM® CLEAN 2029 “One-Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two to four weeks of indoor corrosion inhibition on steel and cast iron parts.
- CLEAN 2029 “One-Step” has been approved as a “Clean Air Solvent” by the California South Coast AQMD
- Will reliably provide one to two weeks of indoor corrosion inhibition on steel or cast iron parts if not rinsed
- Formulated without silicates or other high pH additives, CLEAN 2029 “One-Step” is compatible with ultrafiltration systems and bioremediation
- An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
- Hard water tolerant, it provides long bath life
- Environmental approvals are simplified because CLEAN 2029 “One-Step” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers with temperature above 125°F(52°
C)
|
|
TRIM® RINSE 100
Washing Compound Concentrate
|
|
|
TRIM® RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM® family of cutting and grinding fluid concentrates.
- Compatible with all aluminum, magnesium, copper alloys, steel and cast iron
- An effective machine cleaner and also a great product for general cleaning of loose tools and parts
- An excellent product for use in ultrasonic cleaner systems, as well as immersion washers
- Provides up to one week or more of in-process corrosion inhibition on ferrous parts
|
|
TRIM®
Machine Tool Sump and System Cleaner
|
|
|
|
This Product has Rolls Royce Approval CSS203
TRIM® Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.
- A very specialized formula that draws on Master Chemical’s knowledge of coolant formulation and many years of hands-on experience in machine clean-outs
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic and soluble oil coolants, as well as most know competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses or skirting, and it won’t leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
|
|
|
Aerospace
