|
Home > North America > Fluid Products > Cleaners & Washing Compounds 
|
Spray
TRIM® spray cleaners clean faster for increased production in applications where the cleaning fluid is sprayed onto the parts. TRIM spray cleaners are low foaming and operate at low concentrations and lower temperatures, which increases your bottom line by reducing makeup and saving energy costs. TRIM spray cleaners provide corrosion inhibition and eliminate staining rejects.
|
 |
TRIM® CLEAN 2012
Low-foaming, Nonsilicated Cleaner for Aluminum and Multi-metal
|
|
|
TRIM® CLEAN 2012 is a highly-concentrated cleaner built for spray washing aluminum and other metals at ambient to slightly elevated temperatures. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it does not contain boron, phenols, or silicates.
- With a mild pH, CLEAN 2012 will not cause staining on aluminum or yellow metals
- Formulated without silicates or other high pH additives, CLEAN 2012 is compatible with ultrafiltration systems and bio-remediation
- An excellent choice where one product is used for multiple metals, as it is compatible with both ferrous and nonferrous materials (except magnesium)
- Hard water tolerant, CLEAN 2012 has only moderate foam at room temperature
- Contains no borates or nitrites, no SARA 313 or EPA 33/50 listed ingredients and contains no butyl cellosolve
- Economical and effective for removing coolants and light oils
|
|
TRIM® CLEAN 2017
Economical Heavy-duty Spray Cleaner
|
|
|
TRIM® CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.
- Very economical way to remove heavy soils and light rust
- Low foaming at ambient temperatures, and even lower when used above 120°F (49˚C)
- Can be recycled using XYBEX® equipment
- Contains no solvents, borates, silicates, nitrites, or amines
- Long bath life
- Excellent compatibility with magnesium
- Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed
|
|
TRIM® CLEAN 2023 “Big Al”
Washing Fluid for Aluminum and Multi-Metal Parts
|
|
|
TRIM® CLEAN 2023 “Big Al” is a highly concentrated liquid parts washing compound/corrosion inhibitor for use in spray washers. This product is safe and effective on aluminum alloy and steel alloy parts, as well as cast iron. CLEAN 2023 “Big Al” provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids.
- Inhibits darkening or smutting of aluminum alloys even at elevated temperatures
- Excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
- Provides long bath life
- Environmental approvals are simplified because CLEAN 2023 “Big Al” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers above 120F
- Typically provides up to one week in-process corrosion inhibition on ferrous parts if not rinsed
|
|
TRIM® CLEAN 2029 “One Step”
Parts Washing Fluid with Corrosion Inhibitor
|
|
|
TRIM® CLEAN 2029 “One Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.
- CLEAN 2029 “One Step” has been approved as a “Clean Air Solvent” by the California South Coast AQMD
- Formulated without silicates or other high pH additives, CLEAN 2029 “One Step” is compatible with ultrafiltration systems and bioremediation
- An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
- Hard water tolerant, it provides long bath life
- Environmental approvals are simplified because CLEAN 2029 “One Step” contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers with temperature above 125F (52C)
|
|
TRIM® CLEAN 2115
Low-foam Spray Washing Compound
|
|
|
TRIM® CLEAN 2115 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anti-corrosive film on cast iron or steel parts and washer surfaces.
- Compatible with a wide range of materials including cast iron, steels, zinc, plastics, and composites
- When washing aluminum parts above 100F (40°C) consider using TRIM® CLEAN 2115AL
- Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem.
- Many CLEAN 2115 applications are in the range of 1500 to 3000 PSI (100 to 200kPa)
- Provides excellent short-term corrosion inhibition on most common ferrous alloys
- Extremely low carryoff keeps operating costs down
- Low foam and mist
- Very low initial odor level
- Can be used on most aluminum alloys if kept under 100F (40°C)
- Exceptional sump life and great tramp oil rejection
|
|
TRIM® CLEAN 2115AL
Low-foam Spray Washing Compound
|
|
|
TRIM® CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.
- Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
- Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
- Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (200 to 660 kPa)
- Provides short term corrosion inhibition on cast iron and ferrous alloys
- Excellent biostability
- Extremely low carryoff keeps operating costs down
- Low foam and mist
- Very low initial odor level
- Exceptional sump life and great tramp oil rejection
|
|
TRIM® CLEAN 2430
Near-neutral Washing Compound
|
|
|
TRIM® CLEAN 2430 is a highly-concentrated, mild pH, liquid-parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in process corrosion inhibition when not rinsed.
- CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
- Nitrite and silicate free and leaves no powdery residue
- Low foaming at normal operating temperatures for use in high-pressure spray washers
- CLEAN 2430 “splits” oils to the surface of the cleaner tank for easy skimming
- Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
- Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
- Provides long life between washer cleanouts
|
|
TRIM® CLEAN 3011
Residue-free Multi-Metal Cleaner
|
|
|
TRIM® CLEAN 3011 is a concentrated multi-purpose fluid that excels as a liquid parts washing compound or corrosion inhibitor and does not foam even at room temperature in high-pressure spray washers. It will remove light oils and water soluble cutting and grinding fluid residues and leave behind a thin rust inhibiting film for in-process corrosion inhibition of ferrous parts. CLEAN 3011 is also safe for use on aluminum alloy, copper, brass, bronze, and zinc. CLEAN 3011 is an excellent choice in cast iron operations where it can be used for cleaning and rust inhibition with excellent biostability.
- Silicate, phosphate, and boron free and leaves no powdery residue
- Low foaming for use in high-pressure spray washers or grinders and has excellent hard water stability
- Has a moderate pH, excellent anti-corrosion, and does not require rinsing, making it an excellent short term, in-process corrosion inhibitor
- This product maintains its alkalinity and biostability for long periods of time and will tolerate stagnant conditions such as leak test baths. It is also used in hydrostatic leak testing applications
|
|
TRIM® CLEAN B1
Booster for High-performance Spray Cleaning
|
|
|
TRIM® CLEAN B1 is a highly concentrated blend of surfactants (surface-active agents) designed to add cleaning power to high-pressure spray washers without causing excessive foaming. The product may be added to a wide range of TRIM® alkaline cleaners to boost cleaning power.
- CLEAN B1 contains no borates, phosphates, nitrites, or amines
- CLEAN B1 is low foaming when used above 115°F
- This product is an excellent choice where both ferrous and/or copper alloy parts are being processed
- CLEAN B1 will not stain aluminum parts
- CLEAN B1 is odorless
- Highly caustic cleaners often produce “soaps” as a part of their cleaning action; CLEAN B1 is very effective at reducing foam resulting from the formation of these soaps
- Cleaner bath life can often be extended by using small doses of CLEAN B1; this product is particularly effective in removing oily soils, but will not affect the “split” of oils in TRIM® CLEAN 2430.
|
|
TRIM® CLEAN IP 2019s
Silicated Low-foam Cleaner
|
|
|
TRIM® CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and
coolants from steel, cast iron, and most aluminum parts.
- An excellent cleaner and very economical to use
- Compatible with aluminum, magnesium, cast iron, and steel alloys
- Rejects oil for easy skimming or centrifuging to extend bath life
- Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
- Provides flash corrosion inhibition and up to two weeks of short term, dry, in-process corrosion inhibition
|
|
|
Aerospace
