Specialty Fluids
Special
Products are designed and tailored for unique situations, such as high-pressure,
high-volume coolant applications or to meet special approval requirements.
TRIM® GRIND WC
Carbide Grinding Synthetic
|
|
|
TRIM® GRIND WC minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving “G RATIOS” and reducing grinding forces. GRIND WC is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.
- Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
- Carries grinding swarf to the filter but will release swarf in properly designed settling tanks
- Is not stripped-out by conventional filtration systems
- Operators like GRIND WC’s light-yellow to colorless working solution for superior visibility while grinding
- Exceptional sump life and good tramp oil rejection for easy skimming
- Resists oxidation and varnishing
- Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
- Very low carryoff equals low fluid makeup costs
- Easy recycling or disposal with conventional techniques and equipment
|
|
TRIM® MIST
Synthetic Misting Fluid
|
|
|
TRIM® MIST is a surface active synthetic coolant concentrate for spray mist operations. It is a clear and virtually odorless fluid that controls the overspray that is common with standard cutting and grinding fluids. It works well in cutter/grinder operations or where spray mists are used on boring mills and high-speed face milling.
- Provides rapid and effective cooling
- Keeps grinding wheels clean and free of loading
- Has superior anti-weld action to control built-up edge and chip welding
- Compatible with all ferrous and most nonferrous materials
- Compatible with most nonmetallic materials
- Has very low odor and is pleasant to work with
- Contains no oil to leave slippery films on the work piece, the machine, or in the surrounding area
- Has a very low initial odor level which usually disappears after using for one to two days
- Will keep your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools
- Has exceptional sump life and very good tramp oil rejection
|
|
TRIM®
Minimum Quantity Lubrication Fluid
|
|
|
TRIM® MQL™ 1000 is a high-performance, vegetable-ester-based, micro-lubrication fluid. It is fully compatible with all “micro lube” and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction.
MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.
- No chlorine, sulfur, or mineral oil
- Out-performs the more expensive products
- Environmentally friendly, renewable resource based
- Easily water washable – does not produce hard-to-remove residues
- Very low mist
- Promotes superior finish and tool life and is compatible with all materials
- Very high levels of lubricity with even minimum quantities of material at the point of cut for high material removal rates
- Has been extensively tested and proven in all major brands of micro lube applicators
|
|
TRIM® VHP® E200PW
Very High-pressure, Pratt & Whitney Approved Emulsion
|
|
|
TRIM® VHP® E200PW is a chemical emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials. This approval applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.
- Pratt & Whitney approval for use in all grinding and machining operations on all metals (PMC 9390)
- Contains a proven and highly effective, nonchlorinated extreme-pressure additive to control built-up edge and wheel loading
- No foam at very high pressures and volumes
- Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
- Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
- Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
- Easy recycling or disposal with conventional techniques and equipment
|
|
TRIM® VHP® E210
Very High-pressure, Chlorine-free Emulsion
|
|
|
TRIM® VHP® E210 is a specialized heavy duty chemical emulsion soluble oil coolant concentrate. This product is a proven performer in heavy duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.
- Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
- Low-to-no foam even in very high-pressure operations such as creep-feed grinding, Ejector® drilling, and gundrilling or gunreaming
- Has sufficient boundary lubrication to do roll-form threading in many materials
- Has very good anti-weld properties without the use of either chlorinated or sulfurized EP additives
- Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
- Requires no special disposal or recycling techniques
|
|
TRIM® VHP® E320
Very High-pressure, High-lubricity Emulsion
|
|
|
TRIM® VHP® E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little-to-no foam.
- Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
- Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
- Superior cleaning and EP lubrication characteristics to assist in fast deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
- Very good anti-weld properties without the use of chlorinated EP additives
- Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
- Requires no special disposal or recycling techniques
|
|
TRIM® VHP® E812
Very High-pressure Chlorine-free Emulsion
|
|
|
TRIM® VHP® E812 is a low to no foam, chlorine free, soluble oil. It is ideally suited for those operations that utilize high-pressure, high-volume coolant. VHP® E812 is a fluid that will allow you to get maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will assist in achieving the maximum productivity from creepfeed grinders as well. While VHP® E812 is very stable and is both operator and
environmentally “friendly”, its greatest strength comes from its ability to help you get the job done. It is compatible will all metals and many nonmetallic materials as well. Even with a product as “gutsy” as VHP® E812 it will run for extended periods of time without adds and will do so in a very clean manner. VHP®E812 has a Pratt Whitney approval (PMC 9393).
- A very versatile product that works well in a wide range of operations such as production, creepfeed grinding and milling, turning, drilling, and tapping
- Proven performer in difficult creepfeed grinding operations
- Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
- Very low foam, without the use of conventional defoamers
- Easily recycled or disposed of without special handling or equipment
- Contains no DEA, chlorine, nitrites, triazine, or phenolic compounds
|
|
 |
Aerospace
